BFCQN - 791802 LAC.ACRYLIC N/C GLOSS NPCR CLEAR

  • MSDS: BFCQN
  • Manufacturer: PRATT AND LAMBERT WICHITA DIV
  • Product Name: 791802 LAC.ACRYLIC N/C GLOSS NPCR CLEAR
  • National Stock Number: 8010-00-527-1508
Product Identification

Product ID:791802 LAC.ACRYLIC N/C GLOSS NPCR CLEAR
MSDS Date:01/01/1985
FSC:8010
NIIN:00-527-1508
MSDS Number: BFCQN

Responsible Party
PRATT & LAMBERT-WICHITA DIV.
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: KO010

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

ISOBUTYL ACETATE

RTECS: NP9100000

Fraction By Weight: 35%

ACGIH TLV: 150 PPM


CYCLOHEXANE (SARA III)

CAS: 110-82-7

RTECS: GU6300000

Fraction By Weight: 15%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM, 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 15%

OSHA PEL 100 PPM


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: <0.5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:INHAL:ANEST,IRRIT OF RESPIR TRACT OR ACUT NERV
SYS DEPRESN,HDACH,DIZZ,CONFUS,UNCONSCIOUS,COMA.

First Aid

First Aid:IN CASE OF CONTACT,FLUSH SKIN & EYES W/PLENTY OF WATER WHILE
REMOVING CONTAMINATED CLOTHING.IF INHALATED, REMOV TO FRESH
AIR.CALL A PHYSICIAN IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:21 F TCC -6 C
Lower Limits:.90
Extinguishing Media:USE FIRE EXTING(CO*2,DRY CHEM OR ALCOH FOAM)LO
FIRE-POLYMER
Fire Fighting Procedures:SELF-CONTAINED BREATH APPARATUS SHLD BE AVAIL
F/FIRENEN.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTLY CLOS:ISOLAT FR
HEAT,ELECTR EQPMT,SPARKS & OPEN FLAME.CLOS CONTNRS MAY EXPLO(SUP

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNITION (FLAMES,HOT
SURFACES, & ELECTRICAL,STATIC,OR FRICTIONAL SPARKS).AVOIDBREATHING
VAPORS.VENTILATE AREA.REMOVEW/INERT ABSORBENT & NON-SPARKING TOOLS

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120 F STORE LG
QUANTITIES IN BLDG DESIGNED TO COMPLY W/OSHA 1910.106.
Other Precautions:CONTNRS GROUNDED WHEN POURNG.AVD FRE FALL OF LIQD IN
EXCES OF FEW INCHES.DON'T FLAM CUT,BRAZE.OR WELD COATED MATRL W/O
BUR OF MINES APPRVD RESPIRATOR OR APPROP VENT,ADD LABL WARN"DO NOT
TAKE

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS,USE BUR.OF MINES APPRVD MECH
FILTR RESPIRATOR.
Ventilation:PROVD GEN DILUT OR LOC EXHAUST VENT IN VOL TO KP BELOW TLV.
Protective Gloves:REQD F/REPEATED
Eye Protection:SAFETY EYEWEAR.
Other Protective Equipment:PRVNT PROLNG SKIN CONTACT TO CONTAMINATED
CLOTHING.
Supplemental Safety and Health
UNUS. FIRE & EXPLOS:WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY TO VERY
HOT SURFACES.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:174-321 F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:77

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES,HEAT,& HOT SURFACES.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOC, STATE, & FEDERAL
REGULATIONS.INCINERATE IN APPRVD FACILITY.DO NOT INCINERATE CLOSED
CONTAINER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.